_  

About Electroluminescent (EL) Lighting:

EL Light is created when light emitting phosphor crystals are excited by being exposed to an electric current.

_

Low energy consumption (Most efficient light source on Earth!)

There are no No hazardous materials and is landfill friendly!

Extremely Flexible

Cool to the touch, virtually no heat emission

Highly visible in darkness, smoke, fog etc. versus point-sources of light

Paper thin

Can be seen at greater distances than point source lamps in the dark

Maintenance Free

Easy to look at, pleasing to the eye

No filament to break – never fails to light!

Does not impair night vision

   
Photometrics – Measuring Light:
   
Luminance is measured in
____Foot-Lamberts or Candelas per meter squared
____1 Foot-Lambert = 3.426 Candelas/m 2
Luminance measures how easy something is to see
____i.e. Exit Signage, A Full Moon, FLATLITE
Illuminance is measured in
____Foot-Candles and Lux
Foot-Candles measures how much light there is to see by
____i.e. Emergency Lights (level on the floor), The Sun (daytime)
EL is a light source intended to be seen, not to see by
   
EL Phosphor Facts:  
   
All electroluminescent phosphors emit light when placed in a field of __alternating current

The higher the voltage and / or frequency, the brighter the light, but the __shorter the life- Color also changes with Frequency

All EL Phosphors will slowly lose their ability to produce light over their __operating life – they are not affected by turning on and off

Un-encapsulated EL Phosphors are highly vulnerable to damage due to __moisture :FLATLITE utilizes encapsulated phosphors
Phosphors are manufactured to give off specific colors when energized

__Blue and green phosphors tend to have longest life and brightness

   
EL Phosphor Encapsulation:  
 
EL Lamps use either encapsulated or un-encapsulated phosphors
 

Encapsulated phosphors have each microscopic phosphor particle __surrounded by a glass-like protector

This acts as a moisture barrier to the phosphor, providing reasonable __protection from moisture - Manufacturing and lamination offer additional __protection

Limited worldwide suppliers of encapsulated phosphors
FLAT LITE ® uses encapsulated phosphors
   
Colors:  
 
FLAT LITE ® is manufactured using 2 basic phosphor formulas. One __appears pink when off and white when energized, and the other __appears white when off and green/blue when energized.
Nu-World Distribution makes available 6 color overlays – yellow, orange, __red, green, magenta, blue.
Unlimited numbers of overlays available from third party suppliers can be __added per installation
 

 

What is EL?
 
Why FlatLite?
 
Installations
 
Multimedia
 
Technical Information
 
Applications
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Nu World Distribution |1505 Powell Street , Vancouver , V5L 5C3 | T: 604 254 0908 F: 604 254 0790 | info@nu-worlddistribution.com